Ultra high use pressure rubber combined seal V-type: a high-strength shaft hole dual-use seal

Ultra-high use pressure rubber combined seal V-type: achievable the best cooperation with related friction and sealing.

The V-type HG rubber combined seal is a high-strength shaft hole dual seal for the metallurgical industry, the pore axis dual-use seal on the high pressure heavy-duty hydraulic cylinder on the mine industry.

Main advantages: 

▪ Ultra high use pressure

▪ For different liquids and temperature ranges, it can be adjusted by selecting appropriate materials 

▪ Adaptable for special working conditions.

▪ Due to the stability of the formation, it is not sensitive to high-pressure peaks.

▪ Single part seal compared to the contamination of the medium or slight damage to the sliding surface

▪ Due to the length of the contact area and a few sealing lips, there is excellent sealing performance.

▪v-type seal has a close contact with a pre-load, thereby obtaining a good sealing performance of low friction,working pressure can effectively use the close cooperation between the seal and the mating surface,by adjustable grooves (loop head screws or slots), the optimal cooperation of correlation friction and sealing can be achieved. Since such a regulating device, the seal has a longer working life.

Application range: 

Working pressure: ≤60MPa 

Working temperature: -40 ~ + 100 ° C

Surface speed: ≤0.5 m / s

Even under harsh conditions, the V-type seal is suitable for the sealing of the plunger, piston, valve, and the spool, and therefore, these seals can be recommended in actual conditions that are difficult to predict.

E-mail:Susan@hagaseals.com www.haga-seals.