Polyurethane dust seal FC type: dust-proof and antifouling, greatly prevent scratch, protected directive

Polyurethane dust seal Fc type: for forging hydraulic press, wear resistance, long service life, small compression deformation.

The main role of Fc type HG dust seals is to prevent the entry of powder, dirt, grains, and particles of the plaster,this can be achieved by special design, which greatly prevents scratching, protecting the guide elements, extending the service life of the seal,the FC type double lip dustproof is closed in the direction of the cylinder, and there is no need for special screws and brackets when installing. It does not require strict tolerances, and there is no metal plug-in,the dustproof ring is continuous cyclic, which can be easily loaded into the trench.In addition, the sealing lips of the medium have reduced the remaining oil film, and the polyurethane rubber is guaranteed to have excellent characteristics when dry friction, increase the wear resistance,the service life is extended due to good resistance to ozone and radiation caused by climatic conditions.

Installation: FC type double lip dustpine can be easily loaded into a simple trench, wear resistant, long service life,the lip should be avoided in contact with the piston rod hole or other connecting elements, and the dust ring is preferably mounted outside the housing so that the dirt thus blocked is easy to remove.

Applications: Fc type lips are widely used in forging hydraulic compressor rubber vulcanization machines and various mechanical hydraulic cylinders and cylinders.

Working temperature: -35 ~ + 100 ° C

surface speed: ≤2m / s

Material: XA-2092 is a high-performance nano-urethane material, which is better than high moisture resistance than other polyurethane materials currently sold in the market, and the hydrolyzate capacity is enhanced, and the compression is small.