AY double lip dustproof circle to prevent scratch, protective orientation components

The action of the AY type double lip dust circle is to prevent the entry of dust, dirt, sand and particles. This can be achieved by special design, which greatly prevents scratch, protecting the orientation of the seal.The AY type double-lip dustpower is closed in the direction of the cylinder. There is no need for special screws and brackets when installing, and there is no need for strict tolerances, and there is no metal plug-in. The dust circle is continuous, which can be easily loaded.

In addition, the medium-oriented sealing lip has reduced the remaining oil film. Polyurethane rubber is guaranteed to have excellent features, increasing wear resistance, is good due to ozone and radiation caused by weather conditions.

Application range: AY type double lip dustpower for hydraulic cylinders and cylinders, boots and guide rods.

Operating temperature: -35 ~ + 100 ° C

Surface speed: ≤2m / s

AY installation: AY type double lip dustpower can be easily loaded into a simple trench. It should be avoided from contact with the piston rod hole or other connecting elements.Further, the dust circle lip is preferably installed in the case, so that the blocked dirt is easy to remove.

Material: The standard material is a Hg polyurethane material for the Shaw's hardness A to 92. Compared to other polyurethane materials sold in the current market, its heat resistance increases the hydrolysis ability, and the compression deformation value is small.

If there is a special requirement (temperature, speed, for water, HFB HFB liquids, etc.), please contact the Company's Consultation Service to recommend suitable materials.

Company Mailbox: Susan@hagaseals.com www.haga-seals.